DisplayFastbootCmds¶

Overview¶

The readme file describes how to run display fastboot commands.

All of the supported display fastboot commands are listed as below:

fastboot oem select-display-panel none
fastboot oem select-display-panel <Panel Name>
fastboot oem select-display-panel prim0:<Panel Name>
fastboot oem select-display-panel prim1:<Panel Name>
fastboot oem select-display-panel prim2:<Panel Name>
fastboot oem select-display-panel sec0:<Panel Name>
fastboot oem select-display-panel sec1:<Panel Name>
fastboot oem select-display-panel sec2:<Panel Name>
fastboot oem select-display-panel prim:<Panel Name>

fastboot oem select-display-panel :sec:<Panel Name>
fastboot oem select-display-panel prim<0/1/2>:<Panel Name>

fastboot oem select-display-panel :sec<0/1/2>:<Panel Name>
fastboot oem select-display-panel <Panel Name>:cs<0/1>
fastboot oem select-display-panel <Panel Name>:skip

Display Fastboot Commands Description¶

Command1:

Command Name   : fastboot oem select-display-panel none
Description    : This command is used to disable UEFI display and use kernel panel settings.

Command2:

Command Name   : fastboot oem select-display-panel <Panel Name>
Description    : This command is used to select the specific panel for primary display.

Command3:

Command Name   : fastboot oem select-display-panel prim0:<Panel Name>
Description    : This command is used to select the specific panel for primary display,
                 display is set to on state and cont-splash is on.
                 0 is optional to select panel, same as "fastboot oem select-display-panel prim:<Panel Name>".

Command4:

Command Name   : fastboot oem select-display-panel prim1:<Panel Name>
Description    : This command is used to select the specific panel for primary display,
                 display is set to on state and cont-splash is off.

Command5:

Command Name   : fastboot oem select-display-panel prim2:<Panel Name>
Description    : This command is used to select the specific panel for primary display,
                 display is set to off state, but still pass the panel command line to kernel.

Command6:

Command Name   : fastboot oem select-display-panel sec0:<Panel Name>
Description    : This command is used to select the specific panel for secondary display,
                 display is set to on state and cont-splash is on.
                 0 is optional to select panel, same as "fastboot oem select-display-panel sec:<Panel Name>".

Command7:

Command Name   : fastboot oem select-display-panel sec1:<Panel Name>
Description    : This command is used to select the specific panel for secondary display,
                 display is set to on state and cont-splash is off.

Command8:

Command Name   : fastboot oem select-display-panel sec2:<Panel Name>
Description    : This command is used to select the specific panel for secondary display,
                 display is set to off state, but still pass the panel command line to kernel.

Command9:

Command Name   : fastboot oem select-display-panel prim:<Panel Name>
                 fastboot oem select-display-panel :sec:<Panel Name>
Description    : These commands are used to select the specific panels for dual display.

Command10:

Command Name   : fastboot oem select-display-panel prim<0/1/2>:<Panel Name>
                 fastboot oem select-display-panel :sec<0/1/2>:<Panel Name>
Description    : These commands are used to select the specific panels for dual display,
                 each panel of dual display can be controlled independently.

Command11:

Command Name   : fastboot oem select-display-panel <Panel Name>:cs<0/1>
Description    : This command is used to control cont-splash to on/off state for specific panel,
                 cs0: cont-splash off, cs1: cont-splash on.

Command12:

Command Name   : fastboot oem select-display-panel <Panel Name>:skip
Description    : This command is used to skip bootloader process for specific panel.