#ifndef CUSTOMER_H
#define CUSTOMER_H
/*===========================================================================

                   C U S T O M E R    H E A D E R    F I L E

DESCRIPTION
  This header file provides customer specific information for the current
  build.  It expects the compile time switch /DCUST_H=CUSTxxxx.H.  CUST_H
  indicates which customer file is to be used during the current build.
  Note that cust_all.h contains a list of ALL the option currently available.
  The individual CUSTxxxx.H files define which options a particular customer
  has requested.


Copyright (c) 1996, 1997       by Qualcomm Technologies Incorporated.  All Rights Reserved.
Copyright (c) 1998, 1999, 2000 by Qualcomm Technologies Incorporated.  All Rights Reserved.
Copyright (c) 2001, 2002       by Qualcomm Technologies Incorporated.  All Rights Reserved.
===========================================================================*/


/*===========================================================================

                      EDIT HISTORY FOR FILE

This section contains comments describing changes made to the module.
Notice that changes are listed in reverse chronological order.

$PVCSPath:  L:/src/asw/MSM6050/vcs/customer.h_v   1.3   05 Feb 2002 11:06:06   ropalsky  $
$Header: //components/rel/build.tz/2.10.1/cust/customer.h#1 $ $DateTime: 2020/01/05 22:01:13 $ $Author: pwbldsvc $

when       who     what, where, why
--------   ---     ----------------------------------------------------------
01/13/04   jqi     Removed feature check that requires FEATURE_CDMA_800 and
                   FEATURE_CDMA_1900 when FEATURE_PREFERRED_ROAMING is 
				   defined.
02/05/02    ro     Removed feature checks that depend on T_ definitions.
01/04/02   bkm     Removed feature check that requires FEATURE_ACP when
                   FEATURE_UI_FORCE_CALL is defined.
05/22/01   ck      Added additional feature checks for UIM and R-UIM.
08/16/00   jcw     Added additional feature checks for Tri-Mode.
08/16/00   jcw     MSM5105 baseline based on r1.5 of MSM5000
06/06/00   ts      Added checks for descrepancies with RUIM Driver feature 
                   switches.
04/12/00   va      New checks for SIO feature dependencies.
01/18/00   lcc     Removed FEATURE_SPECIAL_MDR which is not supported in this
                   archive.
09/16/99   lcc     Merged in changes to support UART clocks for MSM5000 from
                   PLTarchive.
08/05/99   sh      added check for FEATURE_PRL_FORCE_MODE not defined
05/27/99   kmp     Removed the check for FEATURE_UI_OTKSL and FEATURE_JSTD008.
                   They should not be linked.
04/21/99   kjn     Removed checking for language features.
04/05/99   kjn     Removed checking for FEATURE_PRL_DLOAD.
02/12/99   lcc     Added checking for FEATURE_SPECIAL_MDR.
01/16/99   ram     Merged in the changes from MDR branch.
12/08/98   lcc     Added checking for FEATURE_MDR_DPT_MARKOV and
                   FEATURE_IS95B_MINUS.
11/30/98   lcc     Added header keyword and checking for MDR feature.
12/16/98   jct     Removed support for outdated or unused targets, removed
                   target specific revision history
04/07/98   BK      Corrected a syntax error and copyright notice.
04/06/98   BK      Ensure that FEATURE_UI_ENHANCED_PRIVACY_SET and
                   FEATURE_VOICE_PRIVACY are mutually exclusive.
03/11/96   fkm     Created file.

===========================================================================*/


/*===========================================================================

                      PUBLIC DATA DECLARATIONS

===========================================================================*/

/* Make sure that CUST_H is defined and then include whatever file it
** specifies.
*/
#ifdef CUST_H
#include CUST_H
#else
#error Must Specify /DCUST_H=CUSTxxxx.H on the compile line
#endif

/* Now perform certain Sanity Checks on the various options and combinations
** of option.  Note that this list is probably NOT exhaustive, but just
** catches the obvious stuff.
*/

#if defined( FEATURE_UI_ENHANCED_PRIVACY_SET ) && defined( FEATURE_VOICE_PRIVACY_SWITCH)
#error defined( FEATURE_UI_ENHANCED_PRIVACY_SET ) && defined( FEATURE_VOICE_PRIVACY_SWITCH)
#endif

#if defined(FEATURE_SMS) != defined(FEATURE_UI_SMS)
#error defined(FEATURE_SMS) != defined(FEATURE_UI_SMS)
#endif

#if defined(FEATURE_UI_TIME_YES) && defined(FEATURE_ACP)
#error defined(FEATURE_UI_TIME_YES) && defined(FEATURE_ACP)
#endif

#if defined(FEATURE_DS_AMPS) && !defined(FEATURE_ACP)
#error defined(FEATURE_DS_AMPS) && !defined(FEATURE_ACP)
#endif

#if defined(FEATURE_UI_SEND_PIN) && !defined(FEATURE_ACP)
#error defined(FEATURE_UI_SEND_PIN) && !defined(FEATURE_ACP)
#endif

#if defined(FEATURE_UI_IMSI_ALL_0_OK) && defined(FEATURE_OTASP)
#error defined(FEATURE_UI_IMSI_ALL_0_OK) && defined(FEATURE_OTASP)
#endif

#if !defined(FEATURE_HWTC)
#if defined(FEATURE_IS95B_MDR) && !defined(FEATURE_DS)
#error defined(FEATURE_IS95B_MDR) && !defined(FEATURE_DS)
#endif
#endif /* !defined(FEATURE_HWTC) */

#if defined(FEATURE_MDR_DPT_MARKOV) && !defined(FEATURE_IS95B_MDR)
#error defined(FEATURE_MDR_DPT_MARKOV) && !defined(FEATURE_IS95B_MDR)
#endif

#if defined(FEATURE_DIAG_RPC) && !defined(FEATURE_NEW_SIO)
#error must define FEATURE_NEW_SIO to use FEATURE_DIAG_RPC
#endif

#if defined(FEATURE_UART_TCXO_CLK_FREQ) && !defined(FEATURE_NEW_SIO)
#error must define FEATURE_NEW_SIO to use FEATURE_UART_TCXO_CLK_FREQ
#endif

#if !defined(FEATURE_PRL_FORCE_MODE) && ( defined(FEATURE_CDMA_800) || defined(FEATURE_ACP) )
#error !defined(FEATURE_PRL_FORCE_MODE) && ( defined(FEATURE_CDMA_800) || defined(FEATURE_ACP) )
#endif

#if defined(FEATURE_SDEVMAP_SHARE_HFK) && \
   !defined(FEATURE_SECOND_UART)
#error FEATURE_SDEVMAP_SHARE_HFK requires FEATURE_SECOND_UART
#endif

#if defined(FEATURE_SDEVMAP_UI_MENU) && \
   !defined(FEATURE_SERIAL_DEVICE_MAPPER)
#error FEATURE_SDEVMAP_UI_MENU requires FEATURE_SERIAL_DEVICE_MAPPER
#endif

#if defined(FEATURE_SDEVMAP_MENU_ITEM_NV) && \
   !defined(FEATURE_SDEVMAP_UI_MENU)
#error FEATURE_SDEVMAP_MENU_ITEM_NV requires FEATURE_SDEVMAP_UI_MENU
#endif

#if defined(FEATURE_SDEVMAP_UI_MENU) && \
   !defined(FEATURE_SDEVMAP_MENU_ITEM_NV)
#error FEATURE_SDEVMAP_UI_MENU requires FEATURE_SDEVMAP_MENU_ITEM_NV
#endif

#if defined(FEATURE_SDEVMAP_SHARE_HFK) && \
   !defined(FEATURE_SERIAL_DEVICE_MAPPER)
#error FEATURE_SDEVMAP_SHARE_HFK requires FEATURE_SERIAL_DEVICE_MAPPER
#endif

#if defined(FEATURE_DS_UI_BAUD) && \
   !defined(FEATURE_DS_DEFAULT_BITRATE_NV)
#error FEATURE_DS_UI_BAUD requires FEATURE_DS_DEFAULT_BITRATE_NV
#endif

#if defined(FEATURE_DS_DEFAULT_BITRATE_NV) && \
   !defined(FEATURE_DS_UI_BAUD)
#error FEATURE_DS_DEFAULT_BITRATE_NV requires FEATURE_DS_UI_BAUD
#endif

#if defined(FEATURE_DIAG_UI_BAUD) && \
   !defined(FEATURE_DIAG_DEFAULT_BITRATE_NV)
#error FEATURE_DIAG_UI_BAUD requires FEATURE_DIAG_DEFAULT_BITRATE_NV
#endif

#if defined(FEATURE_DIAG_DEFAULT_BITRATE_NV) && \
   !defined(FEATURE_DIAG_UI_BAUD)
#error FEATURE_DIAG_DEFAULT_BITRATE_NV requires FEATURE_DIAG_UI_BAUD
#endif

/* Required & Invalid features for UIM */
/* Make sure the second UART is not defined with the RUIM driver */
#if defined ( FEATURE_UIM_DRIVER ) && defined (FEATURE_SECOND_UART)
  #error defined ( FEATURE_UIM_DRIVER ) && defined (FEATURE_SECOND_UART)
#endif /* FEATURE_UIM_DRIVER */

/* Make sure the FEATURE_UIM_DRIVER is defined when FEATURE_UIM is defined */
#if defined ( FEATURE_UIM ) && !defined (FEATURE_UIM_DRIVER)
  #error defined ( FEATURE_UIM ) && !defined ( FEATURE_UIM_DRIVER)
#endif /* FEATURE_UIM */

/* Make sure that FEATURE_UIM is defined when FEATURE_UIM_RUIM is defined */
#if defined ( FEATURE_UIM_RUIM ) && !defined ( FEATURE_UIM )
  #error defined ( FEATURE_UIM_RUIM ) && !defined ( FEATURE_UIM )
#endif /* FEATURE_UIM */

/* Make sure the UIM time test does not interfere with the TRAMP time 
   test */
#if defined (FEATURE_UIM_DRIVER_TIME_TEST) && defined (TRAMP_INT_TIMING_TEST)
  #error defined (FEATURE_UIM_DRIVER_TIME_TEST) && defined (TRAMP_INT_TIMING_TEST)
#endif /* FEATURE_UIM_DRIVER_TIME_TEST */

/* Required & Invalid features for Tri-mode */
#if defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)

#if !defined(FEATURE_IS95B)
#error !defined(FEATURE_IS95B) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_SSPR_800)
#error !defined(FEATURE_SSPR_800) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if defined(FEATURE_NSOTASP)
#error defined(FEATURE_NSOTASP) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_SSPR_ENHANCEMENTS)
#error !defined(FEATURE_SSPR_ENHANCEMENTS) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_IS683A_PRL)
#error !defined(FEATURE_IS683A_PRL) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_PRL_FORCE_MODE)
#error !defined(FEATURE_PRL_FORCE_MODE) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_HOME_ONLY)
#error !defined(FEATURE_HOME_ONLY) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_MAX_ACCESS_FALLBACK)
#error !defined(FEATURE_MAX_ACCESS_FALLBACK) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if !defined(FEATURE_CLASS_1_IMSI)
#error !defined(FEATURE_CLASS_1_IMSI) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#if defined(FEATURE_AVAIL_HOME_SIDE_PREF)
#error defined(FEATURE_AVAIL_HOME_SIDE_PREF) && defined(FEATURE_CDMA_800) && defined(FEATURE_CDMA_1900)
#endif

#endif /* defined(FEATURE_CDMA_800 && defined FEATURE_CDMA_1900 - Tri-mode */

#endif /* CUSTOMER_H */