QDART.SBSY_VFS.2.0 Release Notes

Date: 08/20/2020

Version: 2.0-00131

Changes:

New Features

Bug Fixes

Date: 08/19/2020

Version: 2.0-00130

Changes:

New Features

• [FTTL] Driver update for LTE RFVFS CV2X
• [RFVFS] add dynamic attribute to set seletive sample.
• LOFT Support
• [RFVFS][RxTrigger]Opitimize call flow for multi-port settings
• Keysight EXm: RFVFS LTE supports Rx trigger mode, send *RST at the end of sequence
• [FTTL]Add port switching feature for 2G/3G/4G

Bug Fixes

• [RFVFS] Fix log displaying for 2ULCA test.
• [RFVFS]Support SUB6 subband ID D and E
• [RFVFS]Update RF path filtering algorithm for better test coverage.
• [RFVFS] add upper power limit set for TX min power of LTE
• Need to change the Waveform for NBIoT for QSEQ in DLL
• [RFVFS] fix 10 slot print error
• [RFVFS]Qmine can't parse EDGE ORFS mod
• [RFVFS] add 10 slot for wcdma power sweep
• [RFVFS] add compress xml to cxml.
• [RFVFS]Use POWER measure in segment setting for min power test only
• [RFVFS]Fix long QSEQ running time for multi-DUT
• [RFVFS] RFVFS selft TX quality alway fail when phone not test VSWR with TECH LTE.
• [RFVFS][Core]Fix the processing xml file when specifying a band in “bandList” of RunAllSequences.

Date: 07/09/2020

Version: 2.0-00126

Changes:

New Features

• KS EXM VFS Driver: Multiple issues on Tx and Rx tests for CDMA, EDGE, LTE TDSCDMA & WCDMA
• Limiting the scope of the small object allocator
• Switch self test flag to integer
• [RFVFS][FTTL] 2-4G QSEQ driver changes
• WLAN QSEQ support vHT160BW
• [FTTL]Update 2~4G VFS driver for DL broadcast feature.
• Added capability to create crash dump when QSEQ crash
• KS EXM driver: Downlink frequency adjust for LTE
• RF Cal Performance Optimization
• Update QSEQ MultiplexManager to support WLAN QSEQ list mode test
• [Core]Rework on external package to allow OEM/FTTL to build sub6/mmw instrument only DLL
• [RFVFS]Rework on external package to allow OEM/FTTL to build sub6/mmw instrument only DLL

Bug Fixes

• Fixed an issue with UnloadSuiteDLL
• [RFVFS] Exceptions were seen when running bands with sub-band settings.
• [RFVFS]SUB6 n28A and n28B failed due to subband range was incorrect.
• [RFVFS]WCDMA ILPC fail with multiplex in last two segment
• [RFVFS][LTE]Remove 'pre FreqError' and reuse paremeters from SUITE to display the initial freq. error.
• [RFVFS] Query the UE capability from Tx QTI command
• [RFVFS] change new gsm pvt interface about data proces
• [Bugfix]Exceptions were thrown with latest VFS version,showing 'Files cann't be merged.'
• Add limit check on Time Delta for 2~4G
• [Bugfix][RFVFS]Ant port configuration is not correct in Rx trigger test plan.
• NSVFS report GSM UDR is reported even power is good on one old project with latest DLL.
• [RFVFS] FTTL fix device importLibrary error
• [QSEQ][LTE] Add VSWR limit attribute in test record and move log print to Tx quality.
• [QSEQ] Add VSWR limit attribute in test record and move log print to Tx quality.
• Created release package to release test equipment driver source code for RFVFS 5G
• [RFVFS]Run self test without test equipment on QSEQ
• [RFVFS]Command Execution time failure on EDGE
• callbox require more timeout delay for their cases

Date: 06/20/2020

Version: 2.0-00122

Changes:

New Features

• [FTTL]2-4G RFVFS driver update
• Added TPL/HTML call back function to QIA, Unload SUITE DLL API

Bug Fixes

• [QSEQ][Utilities] QPhone mode support on LoadTestRecord

Date: 05/08/2020

Version: 2.0-00121

Changes:

New Features

• Added TPL/HTML call back function to QIA
• [RFVFS][SUB6]Optimize path filter algorithm.
• KS 2-4G RFVFS EXM driver: LTE Frequency deviation fix, EDGE sensitivity test fix

Bug Fixes

• QSEQ need Asymmetric UlPowerDelta setting in TestRecord
• [RFVFS]Add AntporBitmask in Rf configuration
• Radiated test log shows difference between QSPR log contents and the QSPR log file name.
• [BugFix]Modified.xtr, xpath file and other debugging files are missing with the latest Dll.
• [BugFix]Add Tx only parameters in switch path logic for DL only bands
• Sequence files handle (delete/gen/read) for multi-DUT

Date: 04/16/2020

Version: 2.0-00120

Changes:

New Features

• Add V2X support on one more callbox
• [FTTL]RFVFS 2~4G driver update.

Bug Fixes

• QSEQ GSM Target Power and limit adjustment.
• V2X ACLR don‘t need UTRA testing

Date: 04/16/2020

Version: 2.0-00118

Changes:

New Features

• Add Load Single Element Codebook and isolate for MMW

Date: 04/01/2020

Version: 2.0-00117

Changes:

New Features

• Remove abort common when users choose to remain the phone connection in the end.
• QSEQ server to support run sequence by band
• RFVFS support run sequeneces by band list filter.
• Support estimated sensitivity test in Rx trigger mode for EDGE

Bug Fixes

• [RFVFS]Fix WCDMA SEM data parsing logic.
• [Bugfix]VFS cant generate n28B sequence alone, only can test with n28A together.
• LTE NSVFS throwing exception -Description: Segment Subframe Total EXCEEDS 15030 maximum Limit 4000
• QSPR memory exception thrown during mmw beam char
• Segment subframe' exception in NSVFS for WCDMA
• [VFS_Core] Fix path filter algorithm by assigning Tx path ID with the actual value from UE response.
• [RFVFS]Generate Rx Trigger test plan for 2G and 3G
• [RFVFS][LTE]assign default ranges for B41 subband A/B/C
• [SubSysVFS][Common] add PhoneComm and port detection log in HTML
• [SubSysVFS][Common] add PhoneComm and port detection log in HTML
• SelfTest limit is override to 0 for min power test
• RFVFS GMSK Phase Error logging issue

Date: 03/20/2020

Version: 2.0-00116

Changes:

New Features

• [SubSysVFS][TDSCDMA] merge log of callbox test and self test

Bug Fixes

• Add backoff power for GSM FTM RFVFS

Date: 03/05/2020

Version: 2.0-00114

Changes:

New Features

• [FTTL]Increase the length of the first segment for the ILPC routine
• [FTTL]Support Power sweep for RFVFS WCDMA
• support wifi list mode in FTM test for new device by adding more input configuration parameters
• [FTTL]Support multi-port configuration in FTTL driver.
• Add port switching configuration in RFVFS 2~4G test
• [QSEQ][Tool Side]select RfmPath more flexibly

Bug Fixes

• Add function to parse integer strings to integer list
• [VFS_Core]Add UlChannelRange for split band in LTE
• [SubSysVFS_LTE] fix RFCalVerification log print issue
• QSEQ log folder is not changed after opening other XTT.
• [RFVFS]Support split band range for LTE bands
• GSM Expect power setting is not correct on MT8870A

Date: 01/24/2020

Version: 2.0-00110

Changes:

Bug Fixes

• Support uploadxqcn on QPhoneMS mode

Date: 01/15/2020

Version: 2.0-00108

Changes:

New Features

• CV2X supporting spectrum flatness test on someone callbox.

Bug Fixes

• [RFVFS][WCDMA]Power sweep first slot power is not stable in E step.

Date: 01/15/2020

Version: 2.0-00107

Changes:

New Features

• Add support to generate test sequences for different antenna port.
• Add support for the T6290 (2G-4G)

Bug Fixes

• [RFVFS][SUB6]Override Rx Chain number with the associated Rx chain number in all path test.
• [RFVFS][EDGE]Remove Self-Test column from TE-only test report.

Date: 01/07/2020

Version: 2.0-00103

Changes:

New Features

• [LTE]Update call box driver to use MM with single module per 4 ports, or use two modules per 8 ports
• [RFVFS]Remove slickedit files
• [QSEQ][VFS_Core]Move Phone Communication to CORE utility
• [VFS_Cellular]Replace phone communication with common core utility
• ADD wcdma SEM marine limit setting
• [SubSysVFS][CDMA]Merge self-test and box-test results into same tables.
• [SubSysVFS]Skip Freq. Adjust in SelfTest only mode.
• [RFVFS]Add limit check to ensure one sequence won't exceed maximum subframe/timeslot number.

Bug Fixes

• Add std exception for QSEQ
• FTM RF Path V1: Updated path ID with antenna config type to pic the right Tx associated path.
• Fix LTE NSVFS unknow RMC err.
• [BugFix]Allow users to set NRFR1 as the detect tech.
• [BugFix]Allow users to set NRFR1 as the detect tech.

Date: 12/12/2019

Version: 2.0-00102

Changes:

New Features

• WLAN QSEQ release tester handle during close
• [FTTL]Optimize path loss configuration in multi-port cases.
• Add V2x supporting for one more callbox.
• QSEQ WLAN LMRx for phyB adding index
• Unsupported beam handling
• [SubSysVFS][EDGE]Merge self-test and box-test results into same tables.
• QSEQ Wlan phyB Tx FETC add @2

Bug Fixes

• [BugFix]Allow different DeviceConfig files loaded in a same tree.
• Override LNA gain state if EST_SEN_HIGHEST_LNA_GAIN is set to 1
• Fix RFVFS V2x FREQ err failed issue on some callbox.
• RFVFS LTE failed after RFCAL RFNV reload if not reboot.

Date: 11/27/2019

Version: 2.0-00097

Changes:

New Features

• [FTTL]2G/3G/4G NSVFS/RFVFS updates
• QSEQ WLAN report updates, add 100msec delay before LMRx read stats for stability

Bug Fixes

• [BugFix]QSEQ return PASS even though not tested.
• [BugFix]Reuse the same device name to align with SUB6
• WCDMA RFVFS Power sweep no vaule and GSM RFVFS test fail in some case when using' EDGE_USE_PCL_FOR_POWER_LEVEL'

Date: 10/31/2019

Version: 2.0-00095

Changes:

New Features

• [SubSysVFS_Core]Support all path test for RFVFS SUB6
• [FTTL][TDSCDMA]Adjust to SCPI setting and signal calculation sequence to accelerate test efficiency.
• Minor changes to support mmW RFM Device query
• Code migration between projects
• [RFVFS]Add new attributes to dynamically configure limit relaxation for W/TD/CDMA
• [SubSysVFS_Core]Support SUB6 FDD band for RFVFS
• [x-functional]Add support for IQgig integrity check

Bug Fixes

• [RFVFS]shorten RFVFS P4 path
• Support automatic target detection and chip info id for AddActivePhone

Date: 09/10/2019

Version: 2.0-00083

Changes:

New Features

• Add ALCR limit parameters to be dynamic attributes.
• MPR for CA [Utilities]
• MPR for CA [Xfuntional]
• Add V2X FTM RF testing in RFVFS
• IQxstream common manager to support multiple IQxstream type
• Add Tx limit auto adjust for MPR for NR5G
• Add V2X RFVFS testing
• RFVFS EDGE_EstimatedSensitivity_Rx0 marginal failure
• Add power class1 MPR table and algorithm[xfunctional]
• [utilities]Change OFDM type to UL Waveform
• [X-Functional]Change OFDM type to UL Waveform
• [FTTL]Update 2~4G call box driver for customer issues.
• QSEQ LP 2-4G Driver Update: QSLT upgrade

Bug Fixes

• Allow channel number settings on EDGE_OPT_CHANNEL_BCCH
• Add 'RxTriggerUsage' in parameter list for users to choose Rx trigger test plan.
• [RFVFS][EDGE]Fix displaying issues and add new attributes to dynamically configure limit relaxation.
• QSEQ LP Driver: Get the correct RF port from Multiplex Manager (QCTOOLS-644)
• LP CDMA/LTE RFVFS Driver Update: Sample rate correction/clarification

Date: 08/01/2019

Version: 2.0-00082

Changes:

New Features

• [VFS_Cellular]Update to GV port array to avoid interference by sharing a common variable
• [TestRecord]Enable TDSCDMA PVT in test record
• [VFS_Core]Add OFDM type and RB allocation in dynamic source list
• [Optimization]Re-arrange execution table to output detailed timing information.
• [SubSysVFS_Core] internal optimization for Multi-DUT
• [SubSysVFS] internal optimization for Multi-DUT
• [Core]Update to GV port array to avoid interference by sharing a common variable

Bug Fixes

• QSEQ add dynamice lTE maxEVM limit.
• [BugFix] [Kona][RFVFS]WCDMA B2 Est. Sen. Rx1 pass, but logs show it failed.
• [BugFix][RFVFS]2G/3G verification cannot be performed due to call box command error.
• GSM QSEQ ORFS limit check and add 95th EVM limit check
• Add QSEQ LTE Max EVM seperate limit
• Remove LoadDeviceConfig
• Fix LTE B47 freq err when legacy freq adjust.
• Enable Algorithm logs in Log helper callback to get detailed information in QIA

Date: 06/27/2019

Version: 2.0-00081

Changes:

New Features

• Add RFVFS OBW delta checking between equipment and self test.
• Miscellaneous update on LP driver: EDGE, LTE, TDSCDMA, Sampling Rate for IQxstreaam
• Add support for FTM RF Test Command Capability Query Command
• MPR Library for NR 5G SUB6 - Supporting Changes
• Support for MPR and AMPR limit relaxations

Bug Fixes

• RFVFS LTE 2ULCA OBW test failed.
• QSEQ failed due to “GENERAL_GPIB_INTERFACE_ERROR if loops 1025 times or more.
• [BugFix]Load test record failed when CA is enabled in *.xtr but disabled in *.xrfver
• RFVFS CA test can’t enable

Date: 05/27/2019

Version: 2.0-00073

Changes:

New Features

• [SubSysVFS_Core] Fix memory leak to optimize Multi-DUT/Multi-port verification.
• [Utilities]Fix memory leak to optimize Multi-DUT/Multi-port verification.
• Requirement CR 2449515 | Add Tx limit auto adjust for MPR for NR5G
• [SubsysVFS]Fix memory leak to optimize Multi-DUT/Multi-port verification.

Bug Fixes

• QSEQ test is aborted abnormally on candidate builds
• Change NSVFS EDGE trigger to IF to avoid 8PSK Overtime failure.
• [SubSysVFS_Core] Override phone physical port number if global variables are updated.
• RFVFS XTT node show pass while the ALCR dela failure result can be seen in HTML log when XTT select SelftestPlusEquipment

Date: 04/30/2019

Version: 2.0-00071

Changes:

New Features

• Requirement CR 2433966 | Moving NR5G_defines.h to x-functional
• [SubSysVFS_Core]Enable RFVFS on SUB6 targets - phase II

Bug Fixes

• QSEQ RFVFS LTE ULCA SCC1 TX err is pass but log shows failed.
• [QSEQ][SubsysVFS] Fix the issue of late ramp-up issue during WCDMA PwrSweep in RFVFS
• VISA open will consume more time using qdart4866 dll than qdart4865 dll
• [TestRecord]Keep 'Config' segment in all path to ensure single 'Measure' would not be skipped.
• RFVFS CDMA MAX power table does not display in log in latest version.
• LTE ULCA MAX power logging failure but the avg power is pass.
• [MT8870A][RFVFS]Tx power was shown all '0' when only modulation is the only measure attribute
• [RFVFS][EDGE] Power level/limits cannot be displayed correctly if PCL is turned off and user-defined power level is specified.
• [RF Utils][QSEQ] Add a 10ms pad before the WCDMA power sweep starts
• [FTTL]Support new baseband generator(new hardware) for 2~4G
• [SubSysVFS]Update TDSCDMA RFVFS test plan from continuous mode to burst mode

Date: 03/26/2019

Version: 2.0-00068

Changes:

New Features

• [RFVFS]Simplify LTE All path table and optimize common RF displaying.
• [FTTL] Update call box driver
• [SubSysVFS_Core]Copy RF Path information to the same folder with modified test record file.

Bug Fixes

• Changes are related with LTE-TDD measurements optimization
• RFVFS LTE_AllPath_Verification log min power limit is not right
• [RFVFS] Overwrite RB allocation in estimated sensitivity based on 3GPP
• [RFVFS]Skip sending Tx control in Rx trigger mode.
• Add TDSCDMA Peak EVM limit NSVFS and RFVFS.

Date: 03/20/2019

Version: 2.0-00066

Changes:

New Features

• Update test plan names according to factory team requirement
• [RF Utils][SubSysVFS] Add InitFreqError limit in RFVFS per customer's request
• [RF Utils][SubSysVFS] Add InitFreqError limit in RFVFS per customer's request
• [RF Utils][SubSysVFS] Add InitFreqError limit in RFVFS per customer's request

Bug Fixes

• Add global mutex for visa equipment driver intialization
• Disable NSVFS GSM to use PCL for plower level
• QSEQ Test Record LTE minpower limit err

Date: 02/22/2019

Version: 2.0-00065

Changes:

New Features

• Add sub error code support in NSVFS and RFVFS test record solution
• Update QSEQ driver based on call box vendor's latest requirements.
• [TestRecord]Add a few limits settings in Test Record
• [RFTolls][NSVFS] Support to enable Rx2/Rx3 for WCDMA under FTM-NS for Rx level test
• Adding DCB options for Serial Control
• [SubSysVFS_Core] Add new enum handlers for NR log output
• Update pack it for HY11 of new folder for new record support
• [RFTools][RFVFS]Intra-band contiguous ULCA frequency adjust
• [RFTools][RFVFS]Intra-band contiguous ULCA frequency adjust
• Update QSEQ driver based on call box vendor's latest requirements.
• [SubSysVFS_Core]Overload XML limit functions to support multi-type inputs
• [SubSysCoreVFS] Added limit per band parsing for QSEQ test record
• [Utilities]Add new enum defines for NR log output setting
• QSEQ QIA server to support new test record

Bug Fixes

• [TestRecord]Add a measure property to enable or disable TDS PCDE.
• [RFVFS][TDS]Fix TDSCDMA PeakCDE displaying issue.
• [TestRecord]Create a folder if the path is not existed.
• [SubSysVFS]Relax the default CToN limits to at least 5 for each Tech
• [TestRecord] Abstract Measure Type for each path and process DL_Only paths in Rx trigger
• Makes WCDMA_MEAS_UE_POWER_LEVEL_LIMIT_MAX effective on max power
• add a new elements in TestRecord to set limit per band number,so that we do not need to add limit ,for example ,est sensitivity , band by band
• [NSVFS]Fix conditional logic to enter DL only mode for DL only scenarios.
• LTE RSSI failure when Rx level and sensitivity both tested in one segment
• [SubSysVFS_Core]Update path query object definition to match with the structure in C++
• [Utilities]Update path query object definition to match with the structure in C#
• [RFTools][VFS] EDGE Peak Phase Error limits log diaplay optimization
• [QSEQ] Reset error/failure before running cumulated sequences
• To set PlanTech to false once configTech is false and skip configure for later setting to save time
• To check in code for FTTL vendor to update QSEQ code
• [RFTools][QSEQ]high failure rate with TDD TX modulation test, while non-signaling is good
• [Fix]QSPR occasionaly resport pass of TDS Min power when the test value is out of limit

Date: 12/27/2018

Version: 2.0-00062

Changes:

New Features

• QSEQ, RFVFS Driver: Added support to LP IQxstream-5G
• [RFVFS] Optimize the MPR algorithm for power class 1 and 2
• [SubSysCoreVFS] Optimize the MPR algorithm for power class 1 and 2
• [TestRecord]Add Rx Est Sen upper limits settings in Test Record.

Bug Fixes

• [TestRecord]Fix port switching issue in RFVFS all path.
• Support Quts Mode for VFS
• [NSVFS][All Path]Throw an exception once the DUT supports PLL_ID.
• Extend the TimeAlign Limits to +5/-5 based on IPS team's conclusion.
• [NSVFS][All path] Assign Radio Allocation failed during NSVFS all path Test.
• [TestRecord]Update UNIFIED_TX_RX_CAL_PATH response structure to fix all path query.
• [TestRecord]Add Tx/Rx antenna number attributes for port switch in all path test.
• to resolve QSEQ xml can not generate excel file through QMIN
• To merge code for FTTL about NBIot CTP3308 ,and it is verified by the vendor themself , the test log is provided by the vendor FTTL.
• [SubSysVFS_Core]Fix path loss cofiguration to cover multi-port configuration.
• [TestRecord]fix convertion from dlMaxAnt in xtr to Rx chain attributes.
• [QSEQ][MultiDut] Fix the exception which was thrown when runing 2DUTs at the same time.
• [SubSysVFS_Cellular]Fix path loss cofiguration to cover multi-port configuration.

Date: 11/29/2018

Version: 2.0-00059

Changes:

Bug Fixes

• [NSVFS]Refresh Rx chain before handover to ensure the Rx chain is tuned to the right devices.
• QSEQ LP NSVFS CDMA driver: Failed to fetch waveform quality result when running modulation test (QCTOOLS-641)
• [TestRecord]Add a sequence number in each sequence object to avoid duplicated sequence name.
• Add the margin the pwer sweep segment to avoid timeline misalign b/w UE and callbox
• [NSVFS] Optimize all path code for better performance and utilizing command attributeS as RFVFS
• [VFS_Core]Disable Sequence_mode in RF path query by default
• [X-functional]Utilize common RF path input for ARA command.
• [NSVFS][all path]Optimize NSVFS all path attributes input to cover all path elements.

Date: 11/02/2018

Version: 2.0-00056

Changes:

New Features

• Implement the function to support 4 Rx in LTE Estimated Sensitivity case
• Add frequency correction by Rx measurement

Bug Fixes

• [NSVFS]Change trigger from IF power to Marker3 to enable Timing error measurements
• LP QSEQ driver: Fixed Rx Measure Feature in LTE RFVFS for frequency error compensation

Date: 10/29/2018

Version: 2.0-00055

Changes:

New Features

• [QSEQ]Fix strip file for VFS_Cellular and VFS_Connectivity

Bug Fixes

• [RFtools][QSEQ] fix TDD band for rx measurement freq adjust
• [RFVFS]Add LTE_HANDOFF in RFVFS module to force to restart a call.

Date: 10/09/2018

Version: 2.0-00053

Changes:

New Features

• Update to get Unified RF path for HE
• SEM and OBW self-test support to SubSysVFS for LTE, WCDMA and TDSCDMA
• SEM and OBW self-test support to SubSysVFS for LTE

Bug Fixes

• NSVFS ILPC Fail at -50dbm
• [QSEQ]Fix B46 displaying issue and add SubBand information for BC28
• [TestRecord]Update RF path response structure based on embedded side update.
• [RF Utilities][RFVFS] Fix the LTE ERS error on HE targets
• [RFVFS]Find out all associated label in all sequences when overwriting the RF configuration.
• [TestRecord]Find out all path configurations based on band and sub-band information.
• Calculate the UL channel for B66 when sub-band is added in the sequence
• [RFVFS]Remove Tx control command from DL only (Rx Trigger) test
• [TestRecord] Skip Tx path index output if the processing path is DL only.

Date: 09/04/2018

Version: 2.0-00042

Changes:

New Features

• QSEQ: LP driver: WCDMA: RFVFS ACLR Fix remove double check
• QSEQ: LP: TDSCDMA, RFVFS RFCal verification RxAGC retrigger introduction
• [SubSysVFS]New feature: Comprehensive error reporting for VSWR/selftest
• [X-functional]New feature: Comprehensive error reporting for VSWR/selftest

Bug Fixes

• [RFtools][QSEQ] fix TDD band for rx measurement freq adjust
• [VFS]Fix LTE BC48 displaying issue
• Add B42/B43/B48/B66/B71 in NSVFS/RFVFS default legacy test trees.
• [RFVFS]Fix the time padding calculation for legacy estimated sensitivity
• [NSVFS]Optimize EDGE Rx Cal. Ver. displaying header
• Fix the incorrect displaying issue in QDART CDMA NSVFS test tree
• [VFS_Core]Remove PS control from VFS Core

Date: 07/17/2018

Version: 2.0-00038

Changes:

New Features

• Adding Check Phone Communication and Power Supply control to VFS DLL

Bug Fixes

• [RFVFS]Tune back to the right system mode after legacy Est. Sen. is done.

Date: 07/10/2018

Version: 2.0-00035

Changes:

New Features

• [New Feature][SubSysVFS]Support RFVFS(QSEQ) All Paths in Test Record
• [RF Utilities][SubSysVFS] FR 50490: Add ILPC test in FTM RF mode - VFS part
• [New Feature] [Utilities]Support RFVFS(QSEQ) All Paths in Test Record
• [New Feature] [VFS_CORE]Support RFVFS(QSEQ) All Paths in Test Record
• Add frequency correction by Rx measurement

Bug Fixes

• [RFVFS]Remove the empty header for legacy estimated sensitivity table and delete invalid outputs
• [RFVFS]add processing logic for LTE legacy estimated sensitivity attributes in Cell Data copying functions.
• PCDE measurements on the 8870 and 8820 would add more measurements than necessary
• [NSVFS]Overwrite the duplexing mode to FDD when running DL only test.

Date: 06/08/2018

Version: 2.0-00034

Changes:

New Features

• [RF Utilities][SubSysVFS] FR 50490: Add ILPC test in FTM RF mode - X-Function part

Bug Fixes

• [NSVFS][TDSCDMA]Fix TDSCDMA Rx output typo and add Rx_level in xml report
• [X-functional_Drivers_Bojay_Positioner] : Adding motor status query
• [RF Utilities][SubSysVFS] Add the RxChain in Est. Sens log for QMINE parsing

Date: 05/31/2018

Version: 2.0-00033

Changes:

New Features

• IQxstream changes for measurement support
• [SubSysVFS]Add support for embedded averaging to FTM RF Test RX_MEASURE for all cellular technologies

Bug Fixes

• [RFVFS]Fix Rx Chain logic and add more Rx secondary chain settings in the call flow.
• [NSVFS]Add RF FTM TEST phone detect attributes so that the phone detection band can be configured flexibly
• [X-functional]Fix ARA populate conditional logic for QSEQ all path test
• [SubSysVFS]Optimize the band number input for ARA command
• Now reporting the measurement count on 8870 RFVFS
• [New Test Record] Fix LTE SubBand configuration.
• [SubSysVFS][TDSCDMA]Apply TDSCDMA Rx chain configuration in Pre-altas targets
• [RF Utilities][SubSysVFS] Fix the stability issue in NB-IoT NSVFS test
• [VFS_Core]Add protection code for releasing device manager
• [NSVFS][GSM] optimize EDGE NSVFS output code and fix final Pass/Fail logic.
• [RFVFS]CDMA Freq adjust failed when selected chain is configured to Rx0 and Rx1(Dual Chain)
• [SubSysVFS]Correct input parameter for FTM_LTE_SET_TX_MODULATION_TYPE
• [RFVFS] Fix 'RF Mode exit ' exceptions for LTE/TDS/WCDMA RFVFS test

Date: 05/01/2018

Version: 2.0-00032

Changes:

New Features

• [Core] Merging to common pathloss manager
• [X-functional]Add support for embedded averaging to FTM RF Test RX_MEASURE for all cellular technologies
• Consolidating the NSVFS and RFVFS device config files into one file

Date: 04/20/2018

Version: 2.0-00031

Changes:

New Features

• [VFS] Merging to common pathloss manager
• [X-functional]Add support for embedded averaging to FTM RF Test RX_MEASURE for all cellular technologies
• [SubSysVFS2.0]: Print out the initial Freq.error before freq. adjust
• [SubSysVFS2.0]: Kill QSPR process when disconnectPhoneServer is False at Stop
• [Connectivity] Merging to common pathloss manager

Date: 04/10/2018

Version: 2.0-00028

Changes:

New Features

• Combining TechAbstract config and BandAbstractConfig into a single AbstractConfig
• [New requirement]Add ARA command in WCDMA/TDSCDMA if All Path is enabled.
• [New requirement]Add ARA command for CDMA/EDGE NSVFS call flow and optimize the path filtering logic.
• Adding order to the GSM estimated sensitivity time execution table
• Adding new attribute to relax/tighten LTE SEM limits

Bug Fixes

• [NSVFS][NBIOT]Fix NBIoT equipment data processing issue
• [NSVFS][AllPath]Opimize the filtering function so that multi Tx Paths in a single band can be handled.

Date: 03/19/2018

Version: 2.0-00026

Changes:

New Features

• [New feature] support NSVFS All Path test for WCDMA/TDSCDMA/EDGE/CDMA
• New functions to be able to pass in XML string in addition to XML file path
• MPR updates for 3ULCA

Bug Fixes

• MultiplexManager with R&S CMW native driver issue: Port routing and path loss table incorrect
• [NSVFS][LTE]Remove Enable_SCC2 flag from start call section.
• pply LTE_MEAS_UL_POWER_UPPER_DELTA/LTE_MEAS_UL_POWER_LOWER_DELTA to self-test power limit calculation
• [RF Utilities][SubSysVFS] Fix the error when loading the sequence file with new test record interface
• [NSVFS][AllPath] Change algorithm and attribute names in ARA configuration section based on current technology

Date: 03/01/2018

Version: 2.0-00024

Changes:

New Features

• [RF Utilities][SubSysVFS] Enable QSEQ selective sample feature for NSVFS and RFVFS - Core part
• [RF Utilities][SubSysVFS] Enable QSEQ selective sample feature for NSVFS and RFVFS - Cellular part

Bug Fixes

• [NSVFS][NBIoT]Configure different segment lengths in 15K and 3.75K

Date: 03/01/2018

Version: 2.0-00023

Changes:

New Features

• Adding [TECH]_NUM_RX_CHAIN attribute

Date: 02/20/2018

Version: 2.0-00019

Changes:

New Features

• Support for Estimated Sensitivty on 8870A
• [VFS]Adding new vendor files to VFS and QSEQ solution
• [Core]Adding new vendor files to VFS and QSEQ solution

Bug Fixes

• [NSVFS]deduct carrier back off in 2ULCA inter-band limits.
• Apply LTE_MEAS_UL_POWER_UPPER_DELTA/LTE_MEAS_UL_POWER_LOWER_DELTA to max power limit calculation
• Add GMSK TimeAlign attributes to configure the upper/lower limits according to user's need.
• Add Rx1 using flag settings for legacy targets.
• Add Rx1 using flag enable function in Core part.

Date: 02/08/2018

Version: 2.0-00018

Changes:

New Features

• [New feature] support ALL Path test for FTM NSVFS(x-function)
• [New feature] support ALL Path test for FTM NSVFS(VFS_Core)
• [New feature] support ALL Path test for FTM NSVFS(common definition)
• Removing Starpoint from the shipped VFS DLLs
• [New feature] Initial version for ALL Path test for FTM NSVFS.
• [RFtools][QSEQ] QSEQ FTM command time, add time delta
• [RFtools][QSEQ]QSEQ time, store radio configure data of multiple times

Bug Fixes

• Use QLIB_FTM_LTE_NS_START_DP_ENH if HORxD is capable.
• Add LTE_MEAS_UL_POWER_MPR_REL11 for ULCA MPR computation.
• [RFVFS]Add Cal. verification Tx error passing flag into overall check
• Support LTE B71 standalone test for FTM NSVFS

Date: 01/23/2018

Version: 2.0-00015

Changes:

New Features

• Adding subBand attribute to the test record object
• Adding ability to have multiple estimated sensitivity measurements for CDMA and EDGE
• [NSVFS]New feature: support Downlink-only acquisition in NSVFS

Date: 01/12/2018

Version: 2.0-00014

Changes:

New Features

• Setting the selected rx chains to measure when setting rx chains to tune
• [RFtools][QSEQ] Log time of FTM RF commands in each segment
• [RFtools][QSEQ] Log time of FTM RF commands in each segment
• [MT8870A][NSVFS] New changes for MT8870A according to new requests.
• [RFtools][QSEQ] GSM frame sweep: add port set and FTM RF device, signal path and antenna path to log
• [NSVFS][LTE]CAT-M1 NS Tx Measurement to align to MPSS scheduling
• Expanding the OPT_CHANNEL attribute to use channel number as well
• [New Requirement]Add Magnitude error results in RFVFS test.
• Add Magnitude error in NSVFS EDGE Verification.
• [RFtools][QSEQ]LSE logging in FTM VSWR
• [Core]Moving Response Payload configuration values from the sequence attributes to the DeviceConfig XML
• [Cellular]Moving Response Payload configuration values from the sequence attributes to the DeviceConfig XML

Bug Fixes

• New feature: Dynamic RxD control in EDGE NSVFS
• Skip PvT test in RFVFS continuous mode.
• [Bugfix] add TDSCDMA Rx chain configuration after DCH is set up to avoid Rx errors.

Date: 11/20/2017

Version: 1.0-00241

Changes:

New Features

• [SubSysVFS] Add Burst Mode to LTE TDD for RFVFS
• Polling after *OPC? when setting gen and init on CMW to account for smart channel implementation
• [XFunctional] Add Burst Mode parameters to LTE TDD in RF FTM
• [NSVFS]New feature: HORxD for NSVFS( support FTM_LTE_NS_RX_SELECT_CHAIN_REQ )
• Add a new Rx Chain parameter ID for HORxD.
• Applying the correct value for MSC in edge testing
• Adding OPC and virtual instrument calling for smart channel implementation in the CMW

Bug Fixes

• [SubSysVFS]: Add B46 test in QSEQ
• [SubSysVFS]: Need to add the GSM TimeAlign Limit
• Add new logflag types for global log configuration and make them back-compatible with the old settings.
• Change FTM_LTE_NS_RX_SELECT_CHAIN_REQ order in call flow to ensure right Rx chain is enabled before the related call box port is configured.
• NSVFS: Incorrect Logging of average Tx power for 2ULCA intra cases
• Restructure CDMA Rx measurement variables for multi Rx chain results
• Add self-adaption selection for NBIoT modulation in use based on UL settings
• Fixing the retry issue on ILPC and CLPC
• Split measurement segments in 2ULCA cases only

Date: 11/01/2017

Version: 1.0-00239

Changes:

New Features

• [NSVFS][NBIoT]new feature: suppport LTE NBIoT NSVFS(part2: add NBIoT part in factory modules)
• [NSVFS][NBIoT]new feature: suppport LTE NBIoT NSVFS(final part: add NBIoT headers in NSVFS)
• [X-functional] QSEQ preprocessor changes to allow for CDATA to be used in QSEQ
• 8820C and 8870A able to test LTE 64-QAM UL in NSVFS
• Adding in antenna number to the RRA command
• FR 42738: Add and remove SCC's in an LTE NS call

Bug Fixes

• [NSVFS][CAT_M1] Optimization on NSVFS CAT M1

Date: 10/12/2017

Version: 1.0-00238

Changes:

New Features

• Adding in Rx Self Test Option
• Adding Rx Self Test (no tone est sens) to X-functional
• FR 45060: QSEQ RFVFS and NSVFS support for FTM_SEQUENCER compressed requests and compressed response
• Adding support for 8821C to NSVFS

Date: 10/03/2017

Version: 1.0-00231

Changes:

New Features

• [NSVFS][NBIoT]new feature: suppport LTE NBIoT NSVFS(part1: add new NBIoT base classes)
• Updating aspects of the Test record Interface

Bug Fixes

• Fixed heap error when reading multiplex manager file in CMW

Date: 09/18/2017

Version: 1.0-00230

Changes:

New Features

• [SubSysVFS][CATM1]add MPR computation for CAT M1 test.
• Remove need for separate attribute values for each instrument for CLPC and ILPC measurements
• Adding Support for LTE B250
• [NSVFS][CATM1]Hard code call box related parameters in instrument driver initialize step

Bug Fixes

• Fixed Intraband CA with narrow bands
• [SubSysVFS][NSVFS]Fix CDMA/WCDMA Rx Cal Verification displaying issue.
• [NSVFS][TDSCDMA]Fix QPSR crash and measure TDSCDMA Rx level according to selected Rx Chain information.
• WCDMA DC single chain measurements reporting error
• [NSVFS] Fix the measured_SF offset issue in Cat-M1 NSVFS
• [NSVFS][WCDMA]Add port configurations in each segment of ILPC for multi-DUT test.
• [NSVFS[TDSCMDA]Add port configurations in each segment of CLPC for multi-DUT test.
• [NSVFS][WCDMA]Increase segment ID in ILPC G/H for RF port configuration.

Date: 08/31/2017

Version: 1.0-00228

Changes:

New Features

• QDART.SBSY_VFS: Update driver to support Contiguous Intra-band ULCA for specific Call boxes
• Removing SCC*_ from DLCA report. Now just reporting Ior

Bug Fixes

• [SubSysVFS][LTE]Check LTE bandwidth validation before running test
• Remove SEM mask area (4/-4) settings when the measure range is invalid

Date: 08/14/2017

Version: 1.0-00225

Changes:

New Features

• Added new attributes to control Rx Chain in all techs
• To throw exception when SwitchPath fails
• Support for New Test Record and Configuration Files
• Removing ACLR delta limits for self test vs test equipment
• New feature: support LTE CAT M1 NSVFS test
• Adding QSEQ support in QDART for WLAN

Bug Fixes

• Adding support to query supplemental path loss enable flag
• LTE DLCA doesn't tune correctly for AT target on RFVFS
• Fix Tx_Pwr(dBm) logging issue for 2ULCA in RFVFS

Date: 07/26/2017

Version: 1.0-00224

Changes:

New Features

• Adding QSEQ support in QDART for WLAN

Bug Fixes

• [RFTools][SubSysVFS]: NSVFS implementation of LTE interband ULCA
• [RFTools][SubSysVFS]: Enable ULCA sensitivity test when SCC UL RB number is 0
• X-Functional - Deconfiguring ARA during NS End Call
• Fix for LTE CA RFVFS with legacy devices

Date: 07/20/2017

Version: 1.0-00223

Changes:

New Features

• Changed attribute for estimated sensitivity for target earlier than AT
• Adding support for B46
• [RFtools][QSEQ] selftest: logging for ORFS-M, offsets not exist from embedded side, do not log the offsets
• New Attributes for selecting tuned chains and chains selected to measure
• LTE Band 71 support
• LTE HORxD Support for RFVFS

Bug Fixes

• [RFTools][SubsysVFS] WCDMA ILPC Error code display failure in ConsoleApp file
• Fixed buffer overflow issue if mpss version length greater than 100

Date: 06/22/2017

Version: 1.0-00215

Changes:

New Features

• Adding LTE CA functionality to multiplex manager for CMWS and CMW100
• QDART.SBSY_VFS: Driver update for RFVFS support for LTE, WCDMA and TDSCDMA
• [RFTools][RFVFS]EnableWCDMAPCDEMeasurement

Bug Fixes

• Add a new reliability indicator Capture Buffer Overflow for CMW500 in SubSysVFS

Date: 06/09/2017

Version: 1.0-00214

Changes:

New Features

• QDART.SBSY_VFS: Driver update to support WCDMA Origin Offset result logging for specific vendor call box
• Adding new box measurements to report as well as deltas for self test measurements.
• Adding B32 to LTE functionality
• DART.SBSY_VFS: Driver update for improve performance
• Adding new attribute to use PCL attribute to set power level or use power level attribute.
• Add EDGE 95% EVM test into NSVFS
• Merged UL Power variable between NSVFS and RFVFS

Bug Fixes

• Fix the bugs in LTE 2ULCA test
• Changing the CMWS check from R118 to RA18 in order to take into account the two instrument case.
• [NSVFS] LTE_intraULCA FreqError on QRD660
• NSVFS GSM DUT crash when using multiplex manager
• EVM gap on TDD bands between QSEQ and Pingpong mode.Change the EVM queried align with SUIT code

Date: 05/09/2017

Version: 1.0-00213

Changes:

New Features

• Adding better debug information to the XML log
• New attribute to select if technology supports secondary Rx Chain
• ACLR Delta limits implemented for Dual mode self test
• Adding Rx Level for 3DLCA in NSVFS
• Multiplex manager implementation for Rx Trigger
• Improving SelfTest PvT Reporting
• Properly selecting instrument subsystem for CMW

Bug Fixes

• Unified Tx Info Query in VFS can crash the DLL
• TDSCDMA fails after reporting first channel in self test Dual mode

Date: 04/17/2017

Version: 1.0-00212

Changes:

New Features

• Modifying output result names for self test for consistency with SUITE
• Enabling GSM self test measurements when it is not just Tx only
• Enable WCDMA SBDC measurements on Atlas target
• Multiplex Manager implementation for switching by antenna number on supported targets

Bug Fixes

• Rx and Tx Device/SignalPath/AntennaPath does not update within a sequence
• [RFTools][SubsysVFS] Add FreeLibarary for the DLLs load from DeviceConfig in CloseQSEQAllResources

Date: 03/31/2017

Version: 1.0-00211

Changes:

New Features

• Adding MT8870A to RFVFS
• QDART.SBSY_VFS: RFVFS support added for specific equipment vendor

Date: 03/27/2017

Version: 1.0-00210

Changes:

New Features

• Updating the Result IDs for VSWR testing
• Support Estimated Sensivity of averages in RF FTM TEST(LTE part)
• Support Estimated Sensivity of averages in RF FTM TEST(WCDMA/TDSCDMA part)
• Add QSEQ selftest FD's to be able to datamine selftest results
• Modified sequence to support multiple devices and signal paths within framesweep

Bug Fixes

• Fixed GSM Frame Sweep Crash, add back FTM_SET_MODE before FTM_GSM_SET_ASDIV_PATH
• Clear CMW error before PathLoss_Table_Create
• Adjust start call FTM command order eliminate the possible spikes during start call section.
• Fix Sleep(1000) issue in CONFIGURE if check phone port fail in INITIALIZE
• Fixing typo with attribute RX_MEASUREMENT_OFFSET

Date: 02/22/2017

Version: 1.0-00209

Changes:

New Features

• Adding Limit checks for selftest vs test equipment delta measurements
• Propagating TxMeasure Bitmask per measurement to report selftest results to xml
• [X-functional] Adding ability of running UTI in sequence mode
• [VFS] Adding ability of running UTI in sequence mode
• Adding attribute to suppress the tx control after a radio tune
• Moving total aggregated power math from the report to the instrument drivers
• Adding ability to drop radio within the sequence
• Adding attribute to enable Querying the Unified Tx Information
• LTE NSVFS Interband support
• [RFtools][subsysLTE][X-functional]check phone comm time optimization,add time limit for single test node
• Removing Redundant attribute "TDSCDMA_TX_MODE"
• New attribute for Rx Measurement Offset
• New attribute for Edge segment duration in ms
• Add QSEQ xml log file path output to QSEQ stop session

Bug Fixes

• Map WCDMA ALCR limit attributes to related variables so that ALCR limits can be adjusted.
• Ajust OPT channels in intraband CA scenarios.
• Initialize internal PREV variables from the beginning to fix Rx level bad measurements.

Date: 01/18/2017

Version: 1.0-00206

Changes:

New Features

• Path Num invalid for GSS4100
• Adding get path information to X-functional
• Adding Antenna number to any radio configuration
• Add TDSCDMA Power vs. Time support in list mode test.
• [X-functional] Active Client Allocation implementation
• Implemenation of Query Active Client Allocation in NSVFS
• New Feature:Support of standardized QDART Logging Rules (Common part)
• Support of standardized QDART Logging Rules (QSEQ part)

Bug Fixes

• Optimize PreSequence step:check if DL channels are valid or not in Freq_offset_setup step.
• The equip log hasn't been released after the tester return nothing for a query and throw an exception
• Correct conditional logic to check RB allocation is contiguous or not in both LOW and HIGH SCell position.
• Add frequency error adjust for GSM FrameSweep
• ULCA fixes for self test and 0 RB allocations
• Add an addtional Tx_Control to drive down the initial power to fix retrigger issue
• SelfTest Data does not work with default format descriptors in Dataminer
• WCDMA Estimated Sensitivity Rx1 combines with Max power self test in HTML table

Date: 12/12/2016

Version: 1.0-00204

Changes:

New Features

• Adding Test Time table to QSEQ
• Adding support for 1.4, 3 and 5 MHz to the CMW500
• Leave Tx On during LTE sensitivity measurement for FDD
• LNA override available with new attributes
• Enable GSM Estimated sensitivity for AT targets

Bug Fixes

• Self Test for GSM improved for self test only. Fixed CDMA crash when self test only is executed
• BugFix: Correct WCDMA B19 displaying issue.
• Fix logic issue cause extra delay and many LTE bands UDR + RX RSSI in RFVFS mode
• Adjust B66 ULDL offset to 65536 to get the correct UL frequency.
• Change the timeslot to fix atlas WCDMA ILPC power jump 5db issue.
• Add DataSet Reference information in the sub-table to associate with the previous table.
• TDSCDMA EPV failed on Atlas target in RFVFS mode
• Solution for LTE EVM 5% failure issue in factory tests.
• Change CDMA trigger mode to SEGM as retrigger is needed in CDMA Drx test from time to time.
• Fix the EVM measurement issue on SP9010 callbox
• Initializing uninitialized variables
• Fix the RFVFS EPV failures on the latest QSEQ DLL

Date: 11/11/2016

Version: 1.0-00201

Changes:

New Features

• New Error Code for TDSCDMA Power vs Time test

Bug Fixes

• Aux Port loss issue in CMW500
• BugFix: Sort WCDMA Rx0 and Rx1 AGC measurements in NSVFS for outputting PRx and Drx results separately.
• BugFix: Sort CDMA Rx0 and Rx1 AGC results in NSVFS for outputting Rx0 and Rx1 results separately.

Date: 10/31/2016

Version: 1.0-00200

Changes:

New Features

• Removing the limitation of segment duration for to frame lengths on the CMW
• new feature: 64QAM UL support for LTE FTM NSVFS (single carrier)
• MT8870A LTE NS-VFS Measurement Driver: Added ULCA (Intra-band contiguous) measurement capability
• new feature: 64QAM UL support for LTE FTM RFVFS (single carrier)

Bug Fixes

• CDMA ACPR Self Test values reported as positive dB
• Enable UE power monitor to measure WCDMA min power to eliminate ERS errors.
• set output parameters after StartSession to ensure the output FolderName and LogFile are correct.

Date: 10/24/2016

Version: 1.0-00199

Changes:

New Features

• The Unified Tx Information Query is required to learn the maximum transmit power capability of the currently used Tx chain
• LP QSEQ LTE measurement driver: Support for 15/20 MHz bandwidth

Bug Fixes

• LTE hard coded setting active cell to PCC oin start

Date: 10/14/2016

Version: 1.0-00198

Changes:

New Features

• GSM Frame Sweep for FTM Rf Test in RFVFS
• GSM Self Test measurements for AT
• [RFTools][SubSysVFS] Add the sample DeviceConfig file for StarPoint SP9010 when running NSVFS
• Added Keysight and Starpoint QSEQ device configuration file (XML) to distribution
• Embedded side fixes dictate that having separate radio configures of not needed for ULCA

Bug Fixes

• Set the min_power measurement number to 3 to eliminate invalid power steps.

Date: 09/20/2016

Version: 1.0-00197

Changes:

New Features

• Added Keysight NS/RF VFS QSEQ Driver to distribution
• [RFTools][SubSysGSM] FTM RF verification Self Test support
• QSEQ LP Driver: Added support for other LTE measurement bandwidth (5, 15 and 20 MHz)
• MT8870A: QSEQ Driver. Change the port based on the MutliplexManager selection
• Need an API which will allow us to get a list of supported bands from RFCONFIG repository
• Clarifying the path not found exception when loading sequence XMLs
• LP QSEQ RF/NS-VFS driver: Change waveform to support DLCA BLER measurment
• Changes to datatypes used to represent device, sig path and antenna path
• Embedded side fixes dictate that having separate radio configures of not needed for ULCA

Bug Fixes

• Fix NSVFS LTE test result -999 issue - new RX chain setting break NSVFS LTE test on Thor
• Using the proper SEM power limits for a given Network signal value and bandwidth
• Set generic cell information to PCC data after the handover.
• Configure LTE UL POWER once the UL waveform is adjusted.
• adding a small delay (2 ms) between TX_CONTROL(OFF) and RADIO_CONFIG(Drop All)
• RFVFS AFC bug fix for frequencies greater than 2.1 GHz
• BugFix: fix an Est. Sen. displaying issue. Update limits in legacy calculation method.
• [MTP8996+TDD_ULCA_V4_2]QSEQ RFVFS RX trigger edge RxCalverification Rx fail
• Fix RFVFS freq adj issue - Use high channel's frequency for Low and Mid channel in Radio config cmd
• Pathloss is not applied to the CMW when doing RFVFS init algorithm

Date: 08/22/2016

Version: 1.0-00194

Changes:

New Features

• LP QSEQ measurement driver: waveform file generation maintenance
• LP QSEQ Driver: Added Modulation on/off support for estimated sensitivity test
• XML attribute for LTE that calculates the low, mid and high channels
• add params ID in x-Functional to support antenna port

Bug Fixes

• Add SEM Templates and limits in LTE measurement algorithm to improve the general performance
• CDMA RxTrigger test node show fail although the test result is pass in HTML
• Crash observed while testing all FDD and TDD LTE bands
• Add WCDMA B6 support in RFVFS tests.

Date: 08/01/2016

Version: 1.0-00191

Changes:

New Features

• Changing the log name removing 'Temp' from the Start QSEQ Session logging parameters name to reduce confusion
• Adding LNA State to reports generated with the FTM RF Test Framework
• Including LTE CA estimated sensitivity in the report
• Wait Trigger Implementation for FTM RF Test
• Adding Rx AGC measurements to the estimated sensitivity log
• Wait Trigger Implementation for FTM RF Test
• B43 (3.5GHz) support
• New requirements: Add GSM power adjustment attribute to change the UL/LL limits.
• LP: Added Uplink/Downlink analyzer/generator power level limit check to align with other vendor QSEQ driver
• New Feature: Add the NSVFS support on StarPoint SP9010 callbox
• Adding TDSCDMA continuous mode for RF Test Framework

Bug Fixes

• Fix RFVFS LTE 2ULCA intra-band displaying issue.
• QSEQ 9x55 LTE TDD Rx Measurement failure
• Running TDSCDMA self test only, no instrument measurments, causes a DLL crash
• ULCA IBE commands sent for CMW when doing DLCA
• Configure UL power if UL waveform is re-configured to avoid under driven issues in 2ULCA RFVFS tests.
• Fix for wrong network signaling value getting sent to UE when FTM RF Test framework is used.

Date: 07/12/2016

Version: 1.0-00190

Changes:

New Features

• Send Radio Config with XO Enabled only when it is enabled while performing frequency error correction
• New feature: NSVFS GSM DRx verification support
• Adding RFVFS Self Test for FTM RF Test
• Changes in the FTM command flow for ULCA
• MT8870 Driver: Read "MCI_EQUIPMENT_DEVICE_RF_PORT_CONFIG" from MCI layer to get the PORT ID when multiplexManger is active
• Estimated Sensitivity for FTM RF Test
• Added support to configure port based on "MCI_EQUIPMENT_DEVICE_RF_PORT" variable set by MultiplexManager MCI layer

Bug Fixes

• Fix displaying issues in NSVFS 2DLCA test.
• BugFix: in 2ULCA, turn off SCell1 Tx first before PCell to avoid crash issues.
• BugFix: Reset generic estimated sensitivity flag in algorithm.

Date: 06/20/2016

Version: 1.0-00189

Changes:

New Features

• Removing WCDMA Frequency Error in Hertz from report
• Adding Ior and Num of SCCs to the report of DLCA testing
• Extend LTE UL/DL channel variables to unsigned long in order to support LTE U band
• Adding drop radio to the call flow for all FTM RF Test technologies

Bug Fixes

• QSEQ RnS CMW driver Port_ulRFGen value is hardcoded to 1
• Tx control is now called after every radio configure to properly set the expected Tx power
• BugFix:in Inter-band ULCA tests,reuse the PCC command to fetch SCC IBE results.
• BugFix: SubFrames remain orignal value if SCell RB number is 0.
• [RFTools][SubSysVFS] Update WCDMA/TDS EPV code to support vertical fetch and re-format the log output

Date: 05/27/2016

Version: 1.0-00188

Changes:

New Features

• Implementation of frequency adjust for FTM RF Test framework
• VFS implementation of frequency adjust for FTM RF Test framework
• Changed order of technologies in the enum to match the enum used for FTM RF Test technology
• Enable condition to check for Diversity when populating properties for Radio Configure.
• Allowing for TDSCDMA Rx chain mode to be changed within a measure sequence
• Adding CA SEM mask offsets to the template and changing the limit power levels appropriately

Bug Fixes

• [RF Tools][SubSysVFS] Code updates from MT8870A callbox vendor
• Running WCDMA single carrier after dual carrier fails
• BugFix: Fix TDS min power ERS issue in QSEQ tests
• QSEQ Test Server does not call XML/HTML callback function to print XML/HTML to client
• QSEQ Test Server doesn't print debug message to callback function
• Improve ILPC output format.
• BugFix: add RB allocation in list mode to avoid LTE ERS issue.
• QSEQ LP driver: Improve LTE TDD Tx quality measurement
• QSEQ LP driver: TDSCDMA CLPC measurement compatibilityissue
• LTE 2DLCA and 3DLCA can result in failed Rx measurments

Date: 05/16/2016

Version: 1.0-00186

Changes:

New Features

• Using new method to fetch SEM values with CMW and separating pass fail measurements to be on per mask area basis.
• [NSVFS] add "Channel" into ILPC&CLPC results table
• Removing need to have waveform file in the sequence XMLs in order to run ILPC and CLPC
• New QSEQ node for parameter passing in for Set Radio Allocations
• For FTM RF Test: Device, signal and antenna path to the report for each technology

Bug Fixes

• BugFix: Change Network Signaled Value based on measured items.

Date: 05/06/2016

Version: 1.0-00185

Changes:

New Features

• QSEQ Exceptions now are written to the XML log file

Bug Fixes

• adjust TX power limit based on MPR in NSVFS LTE
• QSEQ LTE LP driver : Improve TDD EVM measurement
• TDSCDMA errors with 8870A
• Remove these unnecessary delay commands that affect handover

Date: 04/29/2016

Version: 1.0-00184

Changes:

New Features

• Added function disconnectphone to release handle properly

Bug Fixes

• QMINE failed to generate Max/Min Power for QSEQ CDMA data
• Logging issues on uplink channels with special bands for LTE NSVFS and RFVFS
• Using CMW the reliability indicator now shows TO when there has been an instrument timeout
• Invalid Memory access when running FTM RF Test API in sequence mode

Date: 04/25/2016

Version: 1.0-00183

Changes:

New Features

• FTM RF Test for WCDMA, TDSCDMA and EDGE
• FTM RF Test for CDMA
• New ability to manually set the device and paths for FTM RF Test framework

Bug Fixes

• BugFix: Change CLPC measurement segments in a symmetric way.

Date: 04/19/2016

Version: 1.0-00181

Changes:

New Features

• When selftest mode is set to Dual, the delta between test equipment and selftest is reported
• Adding the FTM RF Test framework to RFVFS for LTE
• Adding query to see if FTM RF Test is supported by the device
• New Feature: Support 2ULCA tests for NSVFS
• Changes to RRA command request packet to conform to requirements from ICD rev B
• Changes for addition of 2ULCA FTM RF TEST support via SubSysLTE

Bug Fixes

• Optimize the EPV algorithm to dynamically re-range for each segment
• Bug Fix:release the control of equip.xml after all tests are completed.
• [MT8870A]Change the Trigger threshold according to input variable rather than hardcoding it to -20dB.
• Refactor ORFSSW and ORFSMod measurement report code.
• Adding the WCDMA ILPC and TDSCDMA CLPC support on MT8870
• Fixing False Passes for ULCA Power measurements
• ULCA Frequency error correction
• WCDMA ILPC testing is unstable under NSVFS mode on MSM8996
• Using proper values for FTM_SET_CHAN when using bands with special cases
• Adding GSM DRx support for RFVFS

Date: 03/30/2016

Version: 1.0-00180

Changes:

New Features

• Added TDSCDMA CLPC measurement algorithm support for LP driver
• Using new QSPR interface, running QSEQ now requires QSPR 5.4 or later
• Allowing for the PCC and SCC settings to stay persitent and not recofiguring unnecessarily

Bug Fixes

• TesterType doesn't change the report
• QSPR crashes when the same attribute name is used in the same algorithm segment
• Change sample QSEQ Device Config for CMW100 device type to CMW500
• TDSCDMA Self test causes QSPR to crash

Date: 03/11/2016

Version: 1.0-00179

Changes:

New Features

• Replacing any spaces in an HTML or XML filename with an underscore
• When in ULCA contiguous mode, the frequency error is now calculated on the PCC channel when both carriers are active
• Added ILPC G/H support to MT8870A NS-VFS (WCDMA) driver

Bug Fixes

• Incorrect logging of Channel Bandwidth for LTE NSVFS
• Changing parameter header names to be able to be used with the shipped format descriptor
• Placing backslash checks on the Device config XML
• Change MT8870 LTE NS-VFS measurement driver to use Hz to report frequency error
• Bug Fix: Correct NSVFS LTE Tx Power ConsoleApp log output
• LTE TDD Rx Trigger gives bad measurements

Date: 02/29/2016

Version: 1.0-00178

Changes:

Bug Fixes

• Fixes for B29 LTE CA combinations
• Sending proper parameter to set diversity in CDMA
• Removing Set Mode in CDMA Channel Handover

Date: 02/26/2016

Version: 1.0-00177

Changes:

New Features

• XMLLogStoragePath now defined by Device Config XML. Default will save to logging directory specified in Start Session node.
• Adding SCC1 Tx Quality measurements to the ULCA report
• New Attributes to set non-contiguous spacing and position

Bug Fixes

• RFVFS CDMA handover failed, causing handover channel tests failure
• Using the proper CA NS value for ULCA intraband contiguous
• Returning false failure in NSVFS TDSCDMA

Date: 02/18/2016

Version: 1.0-00176

Changes:

New Features

• Allow for multiple CA combinations to be created with stand alone XML files
• Support for power level and RB changes in RFVFS ULCA tests

Bug Fixes

• Change estimated sensitivity averaging method(RFVFS)
• Bug Fix: return True once the correct waveform file is detected.
• Reverting changes to using the new QSPR interface
• Resetting the upper and lower limit values at the end of measure to make sure that delta values work properly

Date: 01/26/2016

Version: 1.0-00175

Changes:

New Features

• New Feature: Self Test Measurements
• Support WCDMA/LTE/CDMA estimated sensitivity in Tx Trigger mode.
• Change LP EDGE measurement sampling rate to 30.72MHz
• Add GNSS support to CMultiplexManager::SwitchPath implementation
• Added exception IDs which can be used by non-RFcal measurement code

Bug Fixes

• 8870A driver creating new VISA handle with each run
• BugFix: Turn off LTE Tx when running Estimated Sensitivity
• Using SequenceRelativeTo XTT tag in deviceconfig.xml through the test server would cause an error
• Multiplex Manager: Incorrect string is formed for the first band class in each technology

Date: 01/13/2016

Version: 1.0-00173

Changes:

New Features

• Implementation of FTM_COMMON_SET_ANTENNA in RFVFS
• Removed unnecessary parameter in Stop Session Function
• Support GSM estimated sensitivity in Tx Trigger mode.

Bug Fixes

• RFVFS CDMA limit issues - Update the parameter CDMA_RL_POWER_MAX
• Bug Fix:Estimated sensitivity is not stable in the first loop for GSM
• Bug Fix:Estimated sensitivity issues under Rx Trigger for CMDA.
• Bug Fix:Rx Level and Estimated sensitivity measurements were not stable

Date: 12/18/2015

Version: 1.0-00172

Changes:

New Features

• Added Tester Type to DeviceConfig.xml

Bug Fixes

• The Device_ConfigfileName in StartQseq can be setup same in Multi-DUT and single-DUT XTT without any change

Date: 12/09/2015

Version: 1.0-00171

Changes:

New Features

• LTE Uplink Carrier Aggregation - Full RB Intraband
• SubSysXFunctional: Add functions to upload Nv Definition file, upload Nv source file and write loaded nv to phone
• DeviceConfig.xml can control where the Sequence file paths are relative to. Accepted strings are "DLL", "XTT" or path to any directory

Bug Fixes

• GSM V2 Calibration Failure due to Binary Read function change
• VISA reads acting as binary read always
• QSEQ LP NSVFS WCDMA Driver issue: ILPC Step E/F reporting error
• Frequency Adjust isn't called when only switching bands
• No support in DLL for attribute "LTE_MEAS_TX_FREQERROR_LOWER_LIMIT"
• False passes being sent through test server
• XTT name doesn't write to the results XML when running the test server
• GSM Frame Sweep Rx measurments only valid for first measurement
• Bug Fix: Memory leaks repaired in the Test Server and QSEQ logger
• Checks WCDMA OBW by default to see if the bandwidth is between 0.1 MHz and 5MHz to fail if there is no bandwidth reported
• Added SCC information to BLER reports in NSVFS

Date: 11/17/2015

Version: 1.0-00164

Changes:

Bug Fixes

• [QSEQ][CMW500+CMWS] Can't control CMWS when run QSEQ Multi-DUT with QSEQ DLL V1.0.162
• IQXstream-M driver fixes

Date: 11/06/2015

Version: 1.0-00163

Changes:

New Features

• New Feture: TDSCDMA/EDGE/C2K Estimated Sensitivity support in FTM RFVFS
• New Feature: IQxstream QSEQ Driver added IQxstream-M support
• Add band parameter for SwithPath function in X_functional multiplex manager
• New Feature: RFVFS IQxstream driver added
• New Feature: Addition of latest measured power in LinkManager
• New Feature: Self-Test for GSM (FBRx UL Power Meas)

Bug Fixes

• Bug Fix: Turns Tx On during DLCA setup and crashes device
• Bug Fix: EDGE Frame Sweep not functional
• Bux Fix: Incorrect logging for GSM min and max power

Date: 10/23/2015

Version: 1.0-00162

Changes:

New Features

• Add QSEQ device config files (NSVFS/RFVFS) for R&S CMW100
• Added PVT Judgement Pass or Fail to CMW results
• New Feature: Support for CMW100

Bug Fixes

• Bug Fix:Calling Start Session multiple times in a row causes crashing
• Bug Fix: Added more segments to ILPC G/H segment settings to reduce possibility of ERS errors
• Bug Fix: Adding back in the ability to change the max and min power levels
• Bug Fix: Trigger type in NSVFS CLPC moved to marker for deterministic triggering
• Bug Fix: Don't check for UL/DL isolation as valid if UL isn't measured

Date: 10/09/2015

Version: 1.0-00161

Changes:

New Features

• Extending Test Server to have to ability to set pathloss
• New Feture: LTE/WCDMA Estimated Sensitivity support in FTM RFVFS

Date: 09/29/2015

Version: 1.0-00160

Changes:

Bug Fixes

• Changes for QDART 4.8-0031 build

Date: 09/23/2015

Version: 1.0-00159

Changes:

New Features

• New Feature: Multiplex Manager configuration section added to the deviceconfig.xml
• NewFeature:NSVFS WCDMA ILPC GH Support on CMW500
• Adding new instrument driver to the source package

Bug Fixes

• Enable diversity port in LTE tests on MT8870A
• Tx Power limit checks to have the same behavior for all technologies
• BugFix: QSEQ can only create logs in C:\ drive, but failed on other local driver.

Date: 08/31/2015

Version: 1.0-00155

Changes:

New Features

• Add IQXStream QSEQ DLL to QDART

Bug Fixes

• RFVFS path loss not set when measuring FreqErr

Date: 08/17/2015

Version: 1.0-00142

Changes:

Bug Fixes

• Bug fix in CDMA FTM Tx sequence: Tx cannot be turned off if Tx is not in ON state.
• QSEQ DLL crashes when instrument at address specified in DeviceConfig.xml does not exist

Date: 08/10/2015

Version: 1.0-00141

Changes:

New Features

• Added Server API support in QSEQ

Bug Fixes

• WCDMA reporting 0 for Tx power when there is nothing transmitted from device

Date: 08/05/2015

Version: 1.0-00140

Changes:

Bug Fixes

• [RFVFS][LTE] LTE__RX__POWER__AVG would error in ConsoleApp txt while the actual results were passed.
• Bug Fix: Potential data corruption in MultiDUT with static attribute map
• CLPC may be failed if it was executed after NON-CLPC test

Date: 07/25/2015

Version: 1.0-00139

Changes:

New Features

• Unifying the way DRDSDS is implemented in all techs
• Adding support for NSVFS WCDMA ILPC with MT8870A
• Adding more support for DLCA band combinations
• New Feature: Enhanced Sweep Verification

Bug Fixes

• QSPR crash due to device disconnection
• RFCAVFS sequences are not executed after an exception
• LTE SEM measurements in NS FTM mode differ from the NSVFS method
• Equipment Read does not display timing information
• QSEQ Source Code: Remove non-ASCII characters from non-Unicode (aka ASCII 7bit encoded) source (.cpp) and (.h) files
• BugFix - Added Close comment tag to RFVFS and NSVFS sample device config files.
• Bug Fix: ILVL Limit check fixed for TE that can't go above 35 dBm

Date: 08/03/2015

Version: 1.0-00137

Changes:

New Features

• Adding support for MT8821C with MT8820C driver
• G+G DRDSDS Implementation
• Adding LTE-U bands parsing for XML Sequences
• QSEQ Sequence Generator Updates to populate list of sequence files for master xtt
• Seq Generator updates to include W+G sequences

Date: 05/15/2015

Version: 1.0-00129

Changes:

New Features

• Adding V2 sequences for RxTrigger
• Adding new Sequences for DRDSDS
• DLL changes for W+G in RFVFS

Bug Fixes

• Enable Tx On in TDD for Tx output after an Rx read
• RFVFS: Adding FTM Error Code for FTM_LTE_CONFIG_DECONFIG_RX_CHAIN
• TxRxconfigure command crashes the device
• MT8870A NSVFS TDSCDMA - Fixed case where input level was not set properly

Date: 08/17/2015

Version: 1.0-00128

Changes:

Bug Fixes

• VFS Freq Error Not Being Calculated Correctly

Date: 08/03/2015

Version: 1.0-00092

Changes:

Bug Fixes

• [LTE RFVFS] QSEQ crash and failures in LTE FDD/TDD (Bolt)