# Copyright (C) 2022 The Qt Company Ltd. # SPDX-License-Identifier: LicenseRef-Qt-Commercial OR LGPL-3.0-only OR GPL-2.0-only OR GPL-3.0-only from __future__ import annotations """ This file contains the exact signatures for all functions in module PySide6.QtPrintSupport, except for defaults which are replaced by "...". # mypy: disable-error-code="override, overload-overlap" """ # Module `PySide6.QtPrintSupport` import PySide6.QtPrintSupport import PySide6.QtCore import PySide6.QtGui import PySide6.QtWidgets import enum import typing from PySide6.QtCore import Signal from shiboken6 import Shiboken class QAbstractPrintDialog(PySide6.QtWidgets.QDialog): class PrintDialogOption(enum.Flag): PrintToFile = ... # 0x1 PrintSelection = ... # 0x2 PrintPageRange = ... # 0x4 PrintShowPageSize = ... # 0x8 PrintCollateCopies = ... # 0x10 PrintCurrentPage = ... # 0x40 class PrintRange(enum.Enum): AllPages = ... # 0x0 Selection = ... # 0x1 PageRange = ... # 0x2 CurrentPage = ... # 0x3 def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /, parent: PySide6.QtWidgets.QWidget | None= ...) -> None: ... def fromPage(self, /) -> int: ... def maxPage(self, /) -> int: ... def minPage(self, /) -> int: ... def printRange(self, /) -> PySide6.QtPrintSupport.QAbstractPrintDialog.PrintRange: ... def printer(self, /) -> PySide6.QtPrintSupport.QPrinter: ... def setFromTo(self, fromPage: int, toPage: int, /) -> None: ... def setMinMax(self, min: int, max: int, /) -> None: ... def setOptionTabs(self, tabs: typing.Sequence[PySide6.QtWidgets.QWidget], /) -> None: ... def setPrintRange(self, range: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintRange, /) -> None: ... def toPage(self, /) -> int: ... class QIntList(object): ... class QPageSetupDialog(PySide6.QtWidgets.QDialog): @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /, parent: PySide6.QtWidgets.QWidget | None= ...) -> None: ... @typing.overload def __init__(self, /, parent: PySide6.QtWidgets.QWidget | None= ...) -> None: ... def done(self, result: int, /) -> None: ... def exec(self, /) -> int: ... def exec_(self, /) -> int: ... @typing.overload def open(self, /) -> None: ... @typing.overload def open(self, receiver: PySide6.QtCore.QObject, member: bytes | bytearray | memoryview, /) -> None: ... def printer(self, /) -> PySide6.QtPrintSupport.QPrinter: ... def setVisible(self, visible: bool, /) -> None: ... class QPrintDialog(PySide6.QtPrintSupport.QAbstractPrintDialog): accepted : typing.ClassVar[Signal] = ... # accepted(QPrinter*) @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /, parent: PySide6.QtWidgets.QWidget | None= ..., *, options: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption | None= ...) -> None: ... @typing.overload def __init__(self, /, parent: PySide6.QtWidgets.QWidget | None= ..., *, options: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption | None= ...) -> None: ... def done(self, result: int, /) -> None: ... def exec(self, /) -> int: ... def exec_(self, /) -> int: ... def open(self, receiver: PySide6.QtCore.QObject, member: bytes | bytearray | memoryview, /) -> None: ... def options(self, /) -> PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption: ... def setOption(self, option: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption, /, on: bool = ...) -> None: ... def setOptions(self, options: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption, /) -> None: ... def setVisible(self, visible: bool, /) -> None: ... def testOption(self, option: PySide6.QtPrintSupport.QAbstractPrintDialog.PrintDialogOption, /) -> bool: ... class QPrintEngine(Shiboken.Object): class PrintEnginePropertyKey(enum.Enum): PPK_CollateCopies = ... # 0x0 PPK_ColorMode = ... # 0x1 PPK_Creator = ... # 0x2 PPK_DocumentName = ... # 0x3 PPK_FullPage = ... # 0x4 PPK_NumberOfCopies = ... # 0x5 PPK_Orientation = ... # 0x6 PPK_OutputFileName = ... # 0x7 PPK_PageOrder = ... # 0x8 PPK_PageRect = ... # 0x9 PPK_PageSize = ... # 0xa PPK_PaperSize = ... # 0xa PPK_PaperRect = ... # 0xb PPK_PaperSource = ... # 0xc PPK_PrinterName = ... # 0xd PPK_PrinterProgram = ... # 0xe PPK_Resolution = ... # 0xf PPK_SelectionOption = ... # 0x10 PPK_SupportedResolutions = ... # 0x11 PPK_WindowsPageSize = ... # 0x12 PPK_FontEmbedding = ... # 0x13 PPK_Duplex = ... # 0x14 PPK_PaperSources = ... # 0x15 PPK_CustomPaperSize = ... # 0x16 PPK_PageMargins = ... # 0x17 PPK_CopyCount = ... # 0x18 PPK_SupportsMultipleCopies = ... # 0x19 PPK_PaperName = ... # 0x1a PPK_QPageSize = ... # 0x1b PPK_QPageMargins = ... # 0x1c PPK_QPageLayout = ... # 0x1d PPK_CustomBase = ... # 0xff00 def __init__(self, /) -> None: ... def abort(self, /) -> bool: ... def metric(self, arg__1: PySide6.QtGui.QPaintDevice.PaintDeviceMetric, /) -> int: ... def newPage(self, /) -> bool: ... def printerState(self, /) -> PySide6.QtPrintSupport.QPrinter.PrinterState: ... def property(self, key: PySide6.QtPrintSupport.QPrintEngine.PrintEnginePropertyKey, /) -> typing.Any: ... def setProperty(self, key: PySide6.QtPrintSupport.QPrintEngine.PrintEnginePropertyKey, value: typing.Any, /) -> None: ... class QPrintPreviewDialog(PySide6.QtWidgets.QDialog): paintRequested : typing.ClassVar[Signal] = ... # paintRequested(QPrinter*) @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /, parent: PySide6.QtWidgets.QWidget | None= ..., flags: PySide6.QtCore.Qt.WindowType = ...) -> None: ... @typing.overload def __init__(self, /, parent: PySide6.QtWidgets.QWidget | None= ..., flags: PySide6.QtCore.Qt.WindowType = ...) -> None: ... def done(self, result: int, /) -> None: ... @typing.overload def open(self, /) -> None: ... @typing.overload def open(self, receiver: PySide6.QtCore.QObject, member: bytes | bytearray | memoryview, /) -> None: ... def printer(self, /) -> PySide6.QtPrintSupport.QPrinter: ... def setVisible(self, visible: bool, /) -> None: ... class QPrintPreviewWidget(PySide6.QtWidgets.QWidget): paintRequested : typing.ClassVar[Signal] = ... # paintRequested(QPrinter*) previewChanged : typing.ClassVar[Signal] = ... # previewChanged() class ViewMode(enum.Enum): SinglePageView = ... # 0x0 FacingPagesView = ... # 0x1 AllPagesView = ... # 0x2 class ZoomMode(enum.Enum): CustomZoom = ... # 0x0 FitToWidth = ... # 0x1 FitInView = ... # 0x2 @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /, parent: PySide6.QtWidgets.QWidget | None= ..., flags: PySide6.QtCore.Qt.WindowType = ...) -> None: ... @typing.overload def __init__(self, /, parent: PySide6.QtWidgets.QWidget | None= ..., flags: PySide6.QtCore.Qt.WindowType = ...) -> None: ... def currentPage(self, /) -> int: ... def fitInView(self, /) -> None: ... def fitToWidth(self, /) -> None: ... def orientation(self, /) -> PySide6.QtGui.QPageLayout.Orientation: ... def pageCount(self, /) -> int: ... def print_(self, /) -> None: ... def setAllPagesViewMode(self, /) -> None: ... def setCurrentPage(self, pageNumber: int, /) -> None: ... def setFacingPagesViewMode(self, /) -> None: ... def setLandscapeOrientation(self, /) -> None: ... def setOrientation(self, orientation: PySide6.QtGui.QPageLayout.Orientation, /) -> None: ... def setPortraitOrientation(self, /) -> None: ... def setSinglePageViewMode(self, /) -> None: ... def setViewMode(self, viewMode: PySide6.QtPrintSupport.QPrintPreviewWidget.ViewMode, /) -> None: ... def setVisible(self, visible: bool, /) -> None: ... def setZoomFactor(self, zoomFactor: float, /) -> None: ... def setZoomMode(self, zoomMode: PySide6.QtPrintSupport.QPrintPreviewWidget.ZoomMode, /) -> None: ... def updatePreview(self, /) -> None: ... def viewMode(self, /) -> PySide6.QtPrintSupport.QPrintPreviewWidget.ViewMode: ... def zoomFactor(self, /) -> float: ... def zoomIn(self, /, zoom: float = ...) -> None: ... def zoomMode(self, /) -> PySide6.QtPrintSupport.QPrintPreviewWidget.ZoomMode: ... def zoomOut(self, /, zoom: float = ...) -> None: ... class QPrinter(PySide6.QtGui.QPagedPaintDevice): class ColorMode(enum.Enum): GrayScale = ... # 0x0 Color = ... # 0x1 class DuplexMode(enum.Enum): DuplexNone = ... # 0x0 DuplexAuto = ... # 0x1 DuplexLongSide = ... # 0x2 DuplexShortSide = ... # 0x3 class OutputFormat(enum.Enum): NativeFormat = ... # 0x0 PdfFormat = ... # 0x1 class PageOrder(enum.Enum): FirstPageFirst = ... # 0x0 LastPageFirst = ... # 0x1 class PaperSource(enum.Enum): OnlyOne = ... # 0x0 Upper = ... # 0x0 Lower = ... # 0x1 Middle = ... # 0x2 Manual = ... # 0x3 Envelope = ... # 0x4 EnvelopeManual = ... # 0x5 Auto = ... # 0x6 Tractor = ... # 0x7 SmallFormat = ... # 0x8 LargeFormat = ... # 0x9 LargeCapacity = ... # 0xa Cassette = ... # 0xb FormSource = ... # 0xc MaxPageSource = ... # 0xd CustomSource = ... # 0xe LastPaperSource = ... # 0xe class PrintRange(enum.Enum): AllPages = ... # 0x0 Selection = ... # 0x1 PageRange = ... # 0x2 CurrentPage = ... # 0x3 class PrinterMode(enum.Enum): ScreenResolution = ... # 0x0 PrinterResolution = ... # 0x1 HighResolution = ... # 0x2 class PrinterState(enum.Enum): Idle = ... # 0x0 Active = ... # 0x1 Aborted = ... # 0x2 Error = ... # 0x3 class Unit(enum.Enum): Millimeter = ... # 0x0 Point = ... # 0x1 Inch = ... # 0x2 Pica = ... # 0x3 Didot = ... # 0x4 Cicero = ... # 0x5 DevicePixel = ... # 0x6 @typing.overload def __init__(self, /, mode: PySide6.QtPrintSupport.QPrinter.PrinterMode = ...) -> None: ... @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinterInfo, /, mode: PySide6.QtPrintSupport.QPrinter.PrinterMode = ...) -> None: ... def abort(self, /) -> bool: ... def collateCopies(self, /) -> bool: ... def colorMode(self, /) -> PySide6.QtPrintSupport.QPrinter.ColorMode: ... def copyCount(self, /) -> int: ... def creator(self, /) -> str: ... def devType(self, /) -> int: ... def docName(self, /) -> str: ... def duplex(self, /) -> PySide6.QtPrintSupport.QPrinter.DuplexMode: ... def fontEmbeddingEnabled(self, /) -> bool: ... def fromPage(self, /) -> int: ... def fullPage(self, /) -> bool: ... def isValid(self, /) -> bool: ... def metric(self, arg__1: PySide6.QtGui.QPaintDevice.PaintDeviceMetric, /) -> int: ... def newPage(self, /) -> bool: ... def outputFileName(self, /) -> str: ... def outputFormat(self, /) -> PySide6.QtPrintSupport.QPrinter.OutputFormat: ... def pageOrder(self, /) -> PySide6.QtPrintSupport.QPrinter.PageOrder: ... def pageRect(self, arg__1: PySide6.QtPrintSupport.QPrinter.Unit, /) -> PySide6.QtCore.QRectF: ... def paintEngine(self, /) -> PySide6.QtGui.QPaintEngine: ... def paperRect(self, arg__1: PySide6.QtPrintSupport.QPrinter.Unit, /) -> PySide6.QtCore.QRectF: ... def paperSource(self, /) -> PySide6.QtPrintSupport.QPrinter.PaperSource: ... def pdfVersion(self, /) -> PySide6.QtGui.QPagedPaintDevice.PdfVersion: ... def printEngine(self, /) -> PySide6.QtPrintSupport.QPrintEngine: ... def printProgram(self, /) -> str: ... def printRange(self, /) -> PySide6.QtPrintSupport.QPrinter.PrintRange: ... def printerName(self, /) -> str: ... def printerState(self, /) -> PySide6.QtPrintSupport.QPrinter.PrinterState: ... def resolution(self, /) -> int: ... def setCollateCopies(self, collate: bool, /) -> None: ... def setColorMode(self, arg__1: PySide6.QtPrintSupport.QPrinter.ColorMode, /) -> None: ... def setCopyCount(self, arg__1: int, /) -> None: ... def setCreator(self, arg__1: str, /) -> None: ... def setDocName(self, arg__1: str, /) -> None: ... def setDuplex(self, duplex: PySide6.QtPrintSupport.QPrinter.DuplexMode, /) -> None: ... def setEngines(self, printEngine: PySide6.QtPrintSupport.QPrintEngine, paintEngine: PySide6.QtGui.QPaintEngine, /) -> None: ... def setFontEmbeddingEnabled(self, enable: bool, /) -> None: ... def setFromTo(self, fromPage: int, toPage: int, /) -> None: ... def setFullPage(self, arg__1: bool, /) -> None: ... def setOutputFileName(self, arg__1: str, /) -> None: ... def setOutputFormat(self, format: PySide6.QtPrintSupport.QPrinter.OutputFormat, /) -> None: ... def setPageOrder(self, arg__1: PySide6.QtPrintSupport.QPrinter.PageOrder, /) -> None: ... def setPageSize(self, size: PySide6.QtGui.QPageSize | PySide6.QtGui.QPageSize.PageSizeId | PySide6.QtCore.QSize, /) -> bool: ... def setPaperSource(self, arg__1: PySide6.QtPrintSupport.QPrinter.PaperSource, /) -> None: ... def setPdfVersion(self, version: PySide6.QtGui.QPagedPaintDevice.PdfVersion, /) -> None: ... def setPrintProgram(self, arg__1: str, /) -> None: ... def setPrintRange(self, range: PySide6.QtPrintSupport.QPrinter.PrintRange, /) -> None: ... def setPrinterName(self, arg__1: str, /) -> None: ... def setResolution(self, arg__1: int, /) -> None: ... def supportedPaperSources(self, /) -> typing.List[PySide6.QtPrintSupport.QPrinter.PaperSource]: ... def supportedResolutions(self, /) -> typing.List[int]: ... def supportsMultipleCopies(self, /) -> bool: ... def toPage(self, /) -> int: ... class QPrinterInfo(Shiboken.Object): @typing.overload def __init__(self, /) -> None: ... @typing.overload def __init__(self, printer: PySide6.QtPrintSupport.QPrinter, /) -> None: ... @typing.overload def __init__(self, other: PySide6.QtPrintSupport.QPrinterInfo, /) -> None: ... def __copy__(self, /) -> typing.Self: ... @staticmethod def availablePrinterNames() -> typing.List[str]: ... @staticmethod def availablePrinters() -> typing.List[PySide6.QtPrintSupport.QPrinterInfo]: ... def defaultColorMode(self, /) -> PySide6.QtPrintSupport.QPrinter.ColorMode: ... def defaultDuplexMode(self, /) -> PySide6.QtPrintSupport.QPrinter.DuplexMode: ... def defaultPageSize(self, /) -> PySide6.QtGui.QPageSize: ... @staticmethod def defaultPrinter() -> PySide6.QtPrintSupport.QPrinterInfo: ... @staticmethod def defaultPrinterName() -> str: ... def description(self, /) -> str: ... def isDefault(self, /) -> bool: ... def isNull(self, /) -> bool: ... def isRemote(self, /) -> bool: ... def location(self, /) -> str: ... def makeAndModel(self, /) -> str: ... def maximumPhysicalPageSize(self, /) -> PySide6.QtGui.QPageSize: ... def minimumPhysicalPageSize(self, /) -> PySide6.QtGui.QPageSize: ... @staticmethod def printerInfo(printerName: str, /) -> PySide6.QtPrintSupport.QPrinterInfo: ... def printerName(self, /) -> str: ... def state(self, /) -> PySide6.QtPrintSupport.QPrinter.PrinterState: ... def supportedColorModes(self, /) -> typing.List[PySide6.QtPrintSupport.QPrinter.ColorMode]: ... def supportedDuplexModes(self, /) -> typing.List[PySide6.QtPrintSupport.QPrinter.DuplexMode]: ... def supportedPageSizes(self, /) -> typing.List[PySide6.QtGui.QPageSize]: ... def supportedResolutions(self, /) -> typing.List[int]: ... def supportsCustomPageSizes(self, /) -> bool: ... # eof